上海渠工阀门管道工程有限公司

技术中心

首页 >> 技术中心

国际标准目录(阀门)汇编

· ISO 5208:1993 Industrial valves -- Pressure testing of valves
· 工业用阀门 阀门的压力试验
· ISO 5209:1977 General purpose industrial valves -- Marking
· 工业用阀门 标记
· ISO 5210:1991 Industrial valves -- Multi-turn valve actuator attachments
· 工业用阀门 多回转阀门驱动装置的连接
· ISO 5211:2001 Industrial valves -- Part-turn actuator attachments
· 工业用阀门 部分回转阀门驱动装置的连接
· ISO 5752:1982 Metal valves for use in flanged pipe systems -- Face-to-face and centre-to-face dimensions
· 法兰管路系统中金属阀门的结构长度
· ISO 5996:1984 Cast iron gate valves
· 铸铁闸阀
· ISO 6002:1992 Bolted bonnet steel gate valves
· 阀盖用螺栓连接的钢制闸阀
· ISO 6552:1980 Automatic steam traps -- Definition of technical terms
· 自动蒸汽疏水阀 术语
· ISO 6553:1980 Automatic steam traps -- Marking
· 自动蒸汽疏水阀 标记
· ISO 6554:1980 Flanged automatic steam traps -- Face-to-face dimensions
· 法兰连接自动蒸汽疏水阀结构长度
· ISO 6704:1982 Automatic steam traps -- Classification
· 自动蒸汽疏水阀 分类
· ISO 6948:1981 Automatic steam traps -- Production and performance characteristic tests
· 自动蒸汽疏水阀 产品试验和工作特性试验
· ISO 7121:1986 Flanged steel ball valves
· 法兰连接钢制球阀
· ISO 7259:1988 Predominantly key-operated cast iron gate valves for underground use
· 主要靠扳手操作的地下用铸铁闸阀
· ISO 7841:1988 Automatic steam traps -- Determination of steam loss -- Test methods
· 自动蒸汽疏水阀 漏气量测定 试验方法
· ISO 7842:1988 Automatic steam traps -- Determination of discharge capacity -- Test methods
· 自动蒸汽疏水阀 排水量测定 试验方法
· ISO 10434:2004 Bolted bonnet steel gate valves for petroleum and natural gas industries
· 石油天然气工业用螺栓连接阀盖钢制闸阀
· ISO 10497:2004 Testing of valves -- Fire type-testing requirements
· 阀门试验 阀门耐火试验要求
· ISO 10631:1994 Metallic butterfly valves for general purposes
· 普通用途的金属蝶阀
· ISO 12149:1999 Bolted bonnet steel globe valves for general-purpose applications
· 通用螺栓连接阀盖钢制球阀
· ISO 15761:2002 Steel gate, globe and check valves for sizes DN 100 and smaller, for the
  petroleum and natural gas industries
· 石油、天然气工业用钢制闸阀、球阀和止回阀(DN≤100)
· ISO 17292:2004 Metal ball valves for petroleum, petrochemical and allied industries
· 石油和石化工业用金属球阀
· ISO 4126-1:2004 Safety devices for protection against excessive pressure -
  Part 1: Safety valves
· 用于超压保护安全装置 第一部分:安全阀
· ISO 4126-2:2003 Safety devices for protection against excessive pressure -
  Part 2: Bursting disc safety devices
· 用于超压保护安全装置 第二部分:安全隔板保险装置
· ISO 4126-4:2004 Safety devices for protection against excessive pressure -
  Part 4: Pilot-operated safety valves
· 用于超压保护安全装置 第四部分:先导式安全阀
· ISO 4126-5:2004 Safety devices for protection against excessive pressure -
  Part 5: Controlled safety pressure relief systems
· 用于超压保护安全装置 第五部分:控制安全压力排放系统
· ISO 4126-6:2003 Safety devices for protection against excessive pressure -
  Part 6: Application, selection and installation of bursting disc safety devices
· 用于超压保护安全装置 第六部分:爆破片安全装置的选择、应用和安装
· ISO 4126-7:2004 Safety devices for protection against excessive pressure -
  Part 7: Common data
· 用于超压保护安全装置 第七部分:通用要求
· ISO 6718:1991 Bursting discs and bursting disc devices
· 安全隔板和安全隔板装置
· ISO 6718:1991/Cor 1:1993 (available in French only)(93年只有法语板)
制修订国际标准目录(阀门)
· ISO/DIS 4126-3 用于超压保护安全装置 第三部分:化工安全装置用安全阀和爆破膜
·ISO/DIS 7121 一般工业用金属球阀
· ISO/DIS 15848-1 工业阀门—测量、试验和资质证明(近期发行)第一部分 阀门的型式试验用系统分类和质量认可程序
· ISO/DIS 15848-1 工业阀门—测量、试验和资质证明(近期发行)第二部分 产品的验收试验
   注:CD—工作组草案;DIS—国际标准草案;FDIS—国际标准最终草案。
上一篇文章: 阀门型号的命名规则编号方法 下一篇文章: 中国阀门标准汇编

QQ在线客服
  • 客服一部 点击这里给我发消息
  • 客服二部 点击这里给我发消息
  • 客服三部 点击这里给我发消息
  • 客服四部 点击这里给我发消息
微信在线客服
(微信号:shqgfm) 请用微信扫码咨询